Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

Replacing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Using the alignment posts, place the I/O board on the palm rest and keyboard
assembly.
2 Align the screw holes on the I/O board with the screw holes on the palm rest
and keyboard assembly.
3 Replace the two screws (M2x3) that secure the I/O board to the palm rest and
keyboard assembly.
4 Connect the power and volume-buttons board cable and the coin-cell battery
cable to the I/O board.
5 Slide the I/O-board cable into the connector on the I/O board and close the
latch to secure the cable.
6 Adhere the tape that secures the I/O-board cable to the I/O board.

Post-requisites

1 Replace the wireless
2 Replace the battery.
3 Replace the base
68
computer. After working inside your computer, follow
After working inside your
card.
cover.
computer. For more safety best
www.dell.com/
Before