Removing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
display
4
Follow the procedure from step 1 to step 2 in
5
Remove the camera.
Procedure
1
Peel off the tape on the sensor-board connector.
86
computer. After working inside your computer, follow
After working inside your
cover.
assembly.
computer. For more safety best
www.dell.com/
"Removing the display
Before
panel".