Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
Procedure
1
Disconnect the speaker cable from the system board.
2
Disconnect the power and volume-buttons board cable and the coin-cell battery
cable from the I/O board.
3
Note the cable routing and remove the power and volume-buttons board cable
from the routing guides on the palm rest and keyboard assembly and the
speaker.
4
Note the cable routing and remove the speaker cable from the routing guides on
the palm rest and keyboard assembly.
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
49