Removing The Sensor Board; Prerequisites; Procedure - Dell Inspiron 15 5000 Service Manual

Removing the sensor board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the base
2 Remove the battery.
3 Remove the display
4 Follow the procedure from step 1 to step 2 in

Procedure

CAUTION: Place the display-panel assembly on a soft and clean surface to
avoid scratching the display.
1 Place the display-panel assembly face down on a flat surface.
2 Remove the screw that secures the sensor board to the display panel.
3 Peel off the tape that secures the sensor-board cable to the sensor board.
4 Open the latch to disconnect the sensor-board cable from the sensor board.
96
computer. After working inside your computer, follow
After working inside your
cover.
assembly.
computer. For more safety best
www.dell.com/
"Removing the display
Before
panel".