(4)
Open the top cover further, release the catches on both sides by sliding the top cover
backward.
Top cover
Bottom cover
3.3
Multi-purpose Paper Tray Assembly
(1)
Pull the left rib outwards from the MP tray and pull out the MP tray. It is not
necessary to release the right rib.
Multi-purpose paper tray
Rib
NOTE: When reassembling, remove the old grease from the Motor heat sink and apply a
suitable amount of new grease (2 rice-grain size) between the heat sink of the
motor and the ground leaf spring.
Sub cover
Fig. 3.3
Fig. 3.4
III-4
Left side
Ground leaf spring
Grease: FLOIL GE-676
(or FLOIL GE-334C)
Catches
Motor heat sink
6.2 mm