Dynojet Power Commander III EX Installation Instructions

Dynojet Power Commander III EX Installation Instructions

2008 kawasaki zx10r

Advertisement

P
L
ARTS
IST
quantity
description
1
power commander EX
1
USB cable
1
cd-rom
1
installation guide
1
power adapter
2
power commander decal
2
dynojet decal
2
dual lock velcro strip
1
alcohol swab
P
LEASE
D
OWNLOAD THE
Dynojet Research • 2191 Mendenhall Drive • North Las Vegas, NV 89081 • (800) 992-4993
i233-411EX
2008 K
I
NSTALLATION
R
A
D
EAD
LL
IRECTIONS
P
C
OWER
OMMANDER SOFTWARE AND LATEST MAPS FROM OUR WEBSITE
.
WWW
POWERCOMMANDER
AWASAKI
ZX10R
I
NSTRUCTIONS
expansion port
B
S
EFORE
TARTING
.
COM
USB port
I
NSTALLATION
:
2008 Kawasaki ZX10R - PCIII USB EX - 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power Commander III EX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dynojet Power Commander III EX

  • Page 1 EFORE TARTING NSTALLATION OWNLOAD THE OWER OMMANDER SOFTWARE AND LATEST MAPS FROM OUR WEBSITE POWERCOMMANDER Dynojet Research • 2191 Mendenhall Drive • North Las Vegas, NV 89081 • (800) 992-4993 2008 Kawasaki ZX10R - PCIII USB EX - 1 i233-411EX...
  • Page 2 The ignition must be turned OFF before installation. Remove the main seat and the passenger seat. Remove the right hand side tail section as shown in Figure A. Prop the front of the fuel tank up. remove covers Remove the pins on the underside tail section as shown in Figure B.
  • Page 3 Unplug the stock connector from the throttle bodies as shown in Figure D. unplug This is a 16-pin brown connector located connector under the fuel tank on the right hand side of the bike. Attach the connectors from the PCIII USB EX harness to the throttle bodies and stock wiring PCIII USB EX harness connectors as shown in Figure E.
  • Page 4 Using the supplied velcro, secure the PCIII USB EX to the inner part of the right hand fairing as shown in Figure G. Make sure to clean both surfaces with the alcohol swab before attaching. 10 Reinstall all body work and the fuel tank. 11 Reinstall the main seat and passenger seat.

Table of Contents