Advanced Programming - Vemer EVO.DIN User Manual

Advanced programming is entered by holding down the
three seconds.
Fields (20) and (14) are not visible. Field (21) shows the message "SEt".
The message relating to the parameter appears in fi eld (15) ("Pre" in the example
above).
The value set fl ashes in fi eld (22). The parameters can be changed using keys
and . Press
The advanced programming parameters (in the order in which they appear) are as
follows:
• Advance: indicates how many minutes
before the change of hour that the sets
programmed in the various programme have
to take place.
For example, if the programme set says that
at 14:00 it is necessary to move from
to , when the "Pre" parameter is set to
15 the change will take place at 13:45 (15
minutes in advance).
• Maximum limit: this is a safety lock that
limits the maximum level of temperatures
and Tm that can be set.

ADVANCED PROGRAMMING

ADVANCED PROGRAMMING
1
to move to the next parameter.
- 49 -
Manual User Evo.din
key for more than
2
3