Programming Menu - Vemer Dafne Wi-Fi User Manual

With this menu it's possible to modify
the following operating parameters:
- Date and time
- Automatic operation programs
- Automatic operation temperatures
- Timings
- Advanced functions.
Time and date modifi cation
To modify the set time and date:
1. From normal operating display, press for a long time the key
starts fl ashing on fi eld (2)
2. Press the key
fl ashing. Parameters sequence to set is:
seconds* -> minutes -> hours -> year -> month -> day
3. Use the keys
to the next parameter.
(*) for seconds it's possible only the synchronisation at value 00
4. Once all parameters are set, to exit and go back to the programming menu, press
for a short time the key
To exit and go back to the normal operation (automatic, manual) press for a long
time the key or wait for the time-out expiration (30 seconds about).
Inside this menu it's also possible to modify the parameters for winter/summer Inside this menu it's also possible to modify the parameters for winter/summer
time change. The procedure is described in a detailed way in the chapter time change. The procedure is described in a detailed way in the chapter
"Summer time change" on page 42. "Summer time change" on page 42.

PROGRAMMING MENU

to access parameters modifi cation. The seconds fi eld starts
and to modify the values and the key
.
Dafne Wi-Fi Chronothermostat User Manual
- 28 -
3s
until the symbol
to confi rm and move