Supported Abb Solutions - ABB RED615 Product Manual

Line Differential Protection and Control
RED615
Product version: 2.0
Figure 7. Line differential protection of an overhead line feeder using RED615 with the
standard configuration C and auto-reclosing option. By means of binary signal
transfer (BST) uncoordinated auto-reclosing attempts are prevented. During the auto-
reclosing sequence a "wait" command is sent to the auto-reclosing function of the
lower circuit breaker and thereby blocking the function. The upper circuit breaker is
thereafter closed by its auto-reclosing function. This blocking signal is reset after
successful auto-reclosing of the upper circuit breaker, enabling the lower breaker to
be closed by its auto-reclosing function.
5. Supported ABB
solutions
ABB's 615 series protection and control IEDs
together with the COM600 Station
Automation device constitute a genuine IEC
61850 solution for reliable power distribution
in utility and industrial power systems. To
facilitate and streamline the system
engineering ABB's IEDs are supplied with
Connectivity Packages containing a
compilation of software and IED-specific
information including single-line diagram
templates, a full IED data model including
event and parameter lists. By utilizing the
Connectivity Packages the IEDs can be
readily configured via the PCM600 Protection
and Control IED Manager and integrated with
the COM600 Station Automation device or the
MicroSCADA Pro network control and
management system.
The 615 series IEDs offer native support for
the IEC 61850 standard also including
horizontal GOOSE messaging. Compared
with traditional hard-wired inter-device
signaling, peer-to-peer communication over a
switched Ethernet LAN offers an advanced
and versatile platform for power system
protection. Fast software-based
Table 3. Supported ABB solutions
Product
Station Automation COM600
MicroSCADA Pro
12
GUID-9EFBFF56-5045-4B24-9C29-01C98ABA81A1 V1 EN
communication, continuous supervision of
the integrity of the protection and
communication system, and inherent
flexibility for reconfiguration and upgrades
are among the distinctive features of the
protection system approach enabled by the
full implementation of the IEC 61850
substation automation standard.
At the substation level COM600 utilizes the
data content of the bay level IEDs to offer
enhanced substation level functionality.
COM600 features a web-browser based HMI
providing a customizable graphical display
for visualizing single line mimic diagrams for
switchgear bay solutions. To enhance
personnel safety, the web HMI also enables
remote access to substation devices and
processes. Furthermore, COM600 can be used
as a local data warehouse for technical
documentation of the substation and for
network data collected by the IEDs. The
collected network data facilitates extensive
reporting and analyzing of network fault
situations using the data historian and event
handling features of COM600.
COM600 also features gateway functionality
providing seamless connectivity between the
substation IEDs and network-level control
and management systems such as
MicroSCADA Pro and System 800xA
Version
3.3 or later
9.2 SP1 or later
1MRS756500 B
Issued: 03.07.2009
ABB