Abb Product Data Registration - ABB RELION 620 Series Operation Manual

Section 8
Commissioning
8.7
138
A071156-ANSI V2 EN
Figure 92: Internal fault test
2.
Select the value with
3.
Press to confirm the selection.

ABB Product Data Registration

The ABB Product Data Registration feature traces composition changes in the protection
relay's SW or HW. Traceability allows better support and maintenance possibilities.
After a composition change, an LCT indication is seen on the LHMI at the protection relay
startup. The PCM600 reads the changed data from the protection relay. Therefore a
connection to the protection relay must be established first. Composition data can be read
with PCM600 by enabling LCT during PCM600 installation and activating collection in
PCM600 from 'Lifecycle Handling' menu. For detailed information see PCM600 online
help.
The LCT indication is cleared in the same way as other indications. If composition data is
not collected with PCM600, the indication reappears after protection relay's reboot.
If the LCT indication appears, update the protection relay composition to
avoid information mismatch. The LCT indication does not affect the
functionality of the protection relay.
The number of composition changes can be seen from the Composition changes
parameter in Main Menu/Monitoring/IED status.
or .
1MAC456939-IB D
620 series ANSI
Operation Manual