Aerohive Networks
Optional Accessories
Aerohive offers a variety of AP130 accessories. Contact your sales representative for more information.
Device, Power, and Environmental Specifications
Understanding the range of specifications for the AP130 is necessary for optimal deployment and device
operations. The following specifications describe the physical features and hardware components, the PoE
requirements, and the temperature and humidity ranges in which the devices can operate.]
Device Specifications
•
Chassis dimensions: 5.75" W x 1.5" H x 5.75" D (146 mm x 38 x 146 mm)
•
Weight: 19 oz (0.54 kg)
•
Two internal 802.11b/g/n 2.4 GHz antennas, and two internal 802.11a/n/ac 5 GHz antennas
•
Console serial port: RJ45 (9600 bits per second, 8 data bits, parity: none, 1 stop bit, no flow control
•
Ethernet port: Eth0 autosensing 10/100/1000 Base-T/TX Mbps, with IEEE 802.3af-compliant PoE
Power Specifications
•
PoE nominal input voltages: 48 V
•
RJ45 power input pins: wires 4, 5, 7, and 8 or 1, 2, 3, and 6
Environmental Specifications
•
Operating temperature: 32° to 104° F (0° to 40 C)
•
Storage temperature: -40° to 185° F (-40° to 85° C)
•
Relative humidity: 5 to 95% RH (noncondensing)
Compliance and Regulatory Information
AP130 Compliance Statement Europe
EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have
been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive
1999/5/EC:
IEC 60950-1:2005+AM1:2009: Safety of Information Technology Equipment
EN 62311: 2008 / Article 3(1)(a) and Article 2 2006/95/EC): Assessment of electronic and electrical equipment related to
human exposure restrictions for electromagnetic fields (0 Hz-300 GHz).
EN 300 328 V1.8.1: 2012-06: Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission
systems; Data transmission equipment operating using wide band modulation techniques; Harmonized EN covering
the essential requirements of article 3.2 of the R&TTE Directive.
EN 301 893 V1.7.1: 2012-06: Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN
covering the essential requirements of article 3.2 of the R&TTE Directive.
EN 301 489-1 V1.9.2: 2011: Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements.
EN 301 489-17 V2.2.1 2012: Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic
Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission
Systems.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to
use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or
network services.
6
AP130 User Guide