Gets The Vcp Baud Rate - Datamars Textile ID R-PO7470 User Manual

9.4.33 Gets the VCP baud rate

•
Command syntax:
•
Command answer:
•
Command action:
•
Parameter range:
Description: this command retrieves the VCP baud rate.
9.4.34 Sets the "auto shutdown" function
•
Command syntax:
•
Command answer:
•
Command action:
•
Parameter range:
Description: this command sets the auto shutdown function. 1: enable function. 0: disable function.
9.4.35 Gets the "auto shutdown" function status
•
Command syntax:
•
Command answer:
•
Command action:
•
Parameter range:
Description: this command returns the key beep function status.
9.4.36 Firmware update function
•
Command syntax:
•
Command answer:
•
Command action:
•
Parameter range:
Description: this command allows the user to update the firmware of the reader. First you need a new
firmware file (R-PO7470_R1V1.hex). Type the command and follow the online instructions.
9.4.37 Character length function
•
Command syntax:
•
Command answer:
•
Command action:
•
Parameter range:
Description: this command sets the UID character length. The Datamars transponders have a UID of
10 hexadecimal characters (i.e. D0060BC5D3). 0: standard format of 10 characters. 1: 12 characters
(add '00' at the begin of the UID). D: decimal format of 10 characters.
R-PO7470 Manual – v. 1.1 – August 2008
"?SB#"[CR]
[CR][LF] "SB=#" [CR][LF]
gets the current VCP baud rate
#= 0 to 4.
".ES#" [CR]
[LF]
sets the "auto shutdown" function
#= 0 or 1.
"?ES" [CR]
[CR][LF] "ES=#" [CR][LF]
gets the "key beep" function status
#= 0 or 1.
".uF" [CR]
[LF]
downloads and installs the up-dated firmware version.
none.
".cl#" [CR]
[LF]
sets the character length function
#= 0 or 1 or d.
31