Gets The "Selected Hit" Function - Datamars Textile ID R-PO7470 User Manual

9.4.23 Gets the "selected hit" function

•
Command syntax:
•
Command answer:
•
Command action:
•
Parameter range:
Description: this command returns the selected hit function status.
1: enable function. 0: disable function.
9.4.24 Sets the "reading beep" function
•
Command syntax:
•
Command answer:
•
Command action:
•
Parameter range:
Description: this command sets the reading beep function. 1: enable function. 0: disable function.
9.4.25 Gets the "reading beep" function status
•
Command syntax:
•
Command answer:
•
Command action:
•
Parameter range:
Description: this command returns the reading beep function status.
9.4.26 Sets the "key beep" function
•
Command syntax:
•
Command answer:
•
Command action:
•
Parameter range:
Description: this command sets the key beep function. 1: enable function. 0: disable function.
9.4.27 Gets the "key beep" function status
•
Command syntax:
•
Command answer:
•
Command action:
•
Parameter range:
Description: this command returns the key beep function status.
R-PO7470 Manual – v. 1.1 – August 2008
"?SH" [CR]
[CR][LF] "SH=#" [CR][LF]
gets the "selected hit" function status
#= 0 or 1.
".RB#" [CR]
[LF]
sets the "reading beep" function
#= 0 or 1.
"?RB" [CR]
[CR][LF] "RB=#" [CR][LF]
gets the "reading beep" function status
#= 0 or 1.
".KB#" [CR]
[LF]
sets the "key beep" function
#= 0 or 1.
"?KB" [CR]
[CR][LF] "KB=#" [CR][LF]
gets the "key beep" function status
#= 0 or 1.
29