Communication On The Fly - Datamars Textile ID R-PO7470 User Manual

At this point select the COM Ports tab and verify that two COM ports have been created: one called
Outgoing and the other called Incoming.
The Outgoing COMxx is needed to connect to the R-PO7470 reader when it is in Act as a Server
mode, while the COMxx Ingoing is needed to connect to the R-PO7470 reader when it is in Act as a
Client mode.
The COM numbering depends on your host PC, this number can be different compared to this
example.
4.4

Communication on the fly

First install the driver and then connect the R-PO7470 to your PC through the USB cable or
BLUETOOTH wireless link. Now you can open a new HyperTerminal session (in Windows).
In the R-PO7470's CD you will find a pre-programmed HyperTerminal session. Copy it to your
desktop (or where you prefer) and run it. If you do not have the CD with pre-programmed a
HyperTerminal session, continue with the following:
R-PO7470 Manual – v. 1.1 – August 2008 20