Advantech MIO-2360 User Manual page 46


Serial IRQ Mode
Configure Serial IRQ Mode.

SMBus Support
Enable/disable SMBus support.

OS Selection
Select the target OS.
3.2.3.3 Uncore Configuration

LVDS Panel Type
Select LCD Panel Type.

2nd LVDS Backlight Control
Switch backlight control for PWM or DC mode.

DDI1 to MIOE I/F
Apply to MIOE I/F, e.g.: DB-5000.

Integrated Graphics Device
Enable: Enable Integrated Graphics Device (IGD) when selected as the primary
video adaptor. Disable: Always disable IGD.

Primary Display
Select which of IGD/PCI graphics device should be the primary display.

RC6 (Render Standby)
Check to enable render standby support.

GTT Size
Select the GTT Size.

Aperture Size
Select the Aperture Size.

DVMT Pre-Allocated
35 MIO-2360 User Manual