Series Ip Telephones; Dual Connection Architecture; Single Connection Architecture; Registration And Authentication - Avaya 4600 Series Administrator's Manual

Avaya 4600 series ip telephone lan administrator's guide
Hide thumbs Also See for 4600 Series:
Table of Contents

Advertisement

4600 Series IP Telephones

Dual Connection Architecture

Releases 1.0 and 1.1 of the 4600 Series IP Telephones use dual connection architecture to
communicate with the DEFINITY
two station extensions must be administered for each telephone.

Single Connection Architecture

Release 1.5 and subsequent releases of the 4600 Series IP Telephones use single connection
architecture to communicate with the DEFINITY
connection architecture, only one station extension must be administered for each telephone.

Registration and Authentication

®
The DEFINITY
or MultiVantage
Series IP Telephones using the extension and password. For further information, see Related
Documents on page 1-5.

Software

As shipped from the factory, the 4600 Series IP Telephones may not contain sufficient software for
registration and operation. When the phone is first plugged in, a software download from a TFTP
server is initiated. This gives the phone its proper functionality.
For downloads of software upgrades, the PBX provides the capability for a remote restart of the
4600 Series IP Telephone. As a consequence of restarting, the phone automatically restarts
reboot procedures. If new software is available, a download will result.

WAN Considerations

QoS is harder on a WAN than a LAN. A LAN assumes no bandwidth concerns. A WAN assumes a
finite amount of bandwidth. Therefore, QoS considerations are more significant when the IP
telephony environment includes a WAN. In addition, there are administrative and hardware
compatibility issues unique to WANs.

DHCP and TFTP Servers

The DHCP server provides the following information to the 4600 Series IP Telephone:
IP address of the 4600 Series IP Telephone
IP Address and port number of the TN799 board on the DEFINITY
server. On the call server, the standard port number is 1719.
®
or MultiVantage
switch. In the dual connection architecture,
TM
®
or MultiVantage
switch supports the registering and authentication of 4600
TM
Overview of Voice over IP (VoIP)
2
2
2
switch. In the single
TM
2
2
2
2
®
or MultiVantage
4600 Series IP Telephones
Call
TM
2-7

Advertisement

Table of Contents
loading

Table of Contents