Battery Replacement; Battery Disposal; Patent Information - AstroStart DSP625 Owner's Manual

Battery Replacement

2625-TX 2-way remote control
1. Unscrew the hardware on unit rear and remove the metal frame from
housing. Pry open the housing, this releases all parts of the assembly.
slide out
2. Gently
the new battery for the correct polarity and insert into holding clip.
3. Reassemble unit and secure with hardware.
2615-TX 1-way remote control
1. If present, remove the small screw on the back of the remote.
2. Use a small flat blade screwdriver and insert it into the slot located along
the bottom of the remote, near the key ring. Carefully pry open the case.
slide out
3. Gently
the new battery for the correct polarity and insert into holding clip.
4. Reposition case parts, and snap together by pressing firmly and evenly on
the front and back. Reinstall screw (if applicable).

Battery Disposal

AstroStart cares about the environment. If you need to dispose of the
battery, please do so in accordance with your municipal requirements
for battery disposal.

Patent Information

This product is covered by one or more of the following United States patents:
Remote Start Patents:
5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936;
5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053;
7,483,783
Vehicle Security Patents:
5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591;
5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667;
5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484
Other patents pending.
© 2017 Directed. All rights reserved.
the used battery to remove it from the holding clip. Orient
the used battery to remove it from the holding clip. Orient
11