Remote Start; Valet Modes - AstroStart DSP625 Owner's Manual

Remote Start

Press and release
Activates the remote starter. The engine and parking lights turn On and the
Remote start LED and On tones play, or the engine and parking lights turn
Off and the Remote start LED and Off tones play to confirm. If a Remote start
configuration issue prevents the engine from starting, a fault tone plays while the
parking lights flash to identify the fault.
Press and hold
Alert Conditions:
Parking Light Flashes
5
6
7
9

Valet Modes

Remote Valet Modes. The Valet commands in the remote command table turn
on/off the Alarm Valet, Start Valet, or Combo Valet Modes (both Alarm & Start
Valet).
• Alarm Valet ( +
The Alarm Valet mode will disable included alarm features when armed/
locked. It also disables any passive arm/lock settings if programmed on.
The 2-way remote control confirms by using LED and tones.
• Start Valet (
The Start Valet mode will disable remote start features until turned off. The
2-way remote control confirms by using LED and tones.
© 2017 Directed. All rights reserved.
for at least 4 seconds to remotely stop the engine.
Possible Cause
Brake ON
Hood Open
After performing Remote Start
command MTS not enabled.
Start Valet on
)
)
+
Solution
Release Foot Brake.
Close Hood.
Enabled MTS Mode.
Turn Start Valet off
9