Figure 480 Red Hat 9.0: Restart Ethernet Card; Figure 481 Red Hat 9.0: Checking Tcp/Ip Properties - ZyXEL Communications ZyWall 5 Series User Manual

ZyWALL 5/35/70 Series User's Guide

Figure 480 Red Hat 9.0: Restart Ethernet Card

[root@localhost init.d]# network restart
Shutting down interface eth0:
Shutting down loopback interface:
Setting network parameters:
Bringing up loopback interface:
Bringing up interface eth0:
Verifying Settings
Enter
ifconfig

Figure 481 Red Hat 9.0: Checking TCP/IP Properties

[root@localhost]# ifconfig
eth0
[root@localhost]#
744
in a terminal screen to check your TCP/IP properties.
Link encap:Ethernet
inet addr:172.23.19.129
UP BROADCAST RUNNING MULTICAST
RX packets:717 errors:0 dropped:0 overruns:0 frame:0
TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:730412 (713.2 Kb)
Interrupt:10 Base address:0x1000
[OK]
[OK]
[OK]
[OK]
[OK]
HWaddr 00:50:BA:72:5B:44
Bcast:172.23.19.255
MTU:1500
TX bytes:1570 (1.5 Kb)
Appendix D Setting up Your Computer's IP Address
Mask:255.255.255.0
Metric:1