Figure 326 Menu 3.2: TCP/IP and DHCP Ethernet Setup
DHCP= Server
Client IP Pool:
Starting Address= 192.168.1.33
Size of Client IP Pool= 128
DHCP Server Address= N/A
Follow the instructions in the next table on how to configure the DHCP fields.
Table 213 Menu 3.2: DHCP Ethernet Setup Fields
FIELD
DHCP
Client IP Pool:
Starting Address
Size of Client IP
Pool
Chapter 35 LAN Setup
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
This field enables/disables the DHCP server.
If set to Server, your ZyWALL will act as a DHCP server.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyWALL acts as a surrogate DHCP server and relays requests
and responses between the remote server and the clients.
When set to Server, the following items need to be set:
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the size, or count of the IP address pool.
ZyWALL 5/35/70 Series User's Guide
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
577