Call Control Support; Budget Management; Figure 429 Call Control - ZyXEL Communications ZyWall 5 Series User Manual

Table 249 Valid Commands
COMMAND
bm
idp
av
as
certificates
8021x
radius

48.2 Call Control Support

The ZyWALL provides two call control functions: budget management and call history.
Please note that this menu is only applicable when Encapsulation is set to PPPoE or PPTP
in menu 4 or menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of
the ZyWALL within certain times. When the total outgoing call time exceeds the limit, the
current call will be dropped and any future outgoing calls will be blocked.
Call history chronicles preceding incoming and outgoing calls.
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 - System
Maintenance - Call Control, as shown in the next table.

Figure 429 Call Control

48.2.1 Budget Management

Menu 24.9.1 shows the budget management statistics for outgoing calls. Enter 1 from Menu
24.9 - System Maintenance - Call Control to bring up the following menu. Not all fields are
available on all models.
Chapter 48 System Maintenance Menus 8 to 10
DESCRIPTION
These commands configure bandwidth management settings and display bandwidth
management information.
These commands configure intrusion detection and prevention settings.
These commands configure anti-virus settings.
These commands configure anti-spam settings.
These commands display certificate information and configure certificate settings.
These commands configure 802.1x settings and display 802.1x information.
These commands display RADIUS information and configure RADIUS settings.
Menu 24.9 - System Maintenance - Call Control
1.Budget Management
2.Call History
Enter Menu Selection Number:
ZyWALL 5/35/70 Series User's Guide
681