ZyWALL 5/35/70 Series User's Guide
37.3.1 IP Address
From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).
Figure 333 Menu 5: DMZ Setup
From menu 5, select the submenu option 2. TCP/IP and DHCP Setup and press [ENTER].
The screen now displays Menu 5.2 -
Figure 334 Menu 5.2: TCP/IP and DHCP Ethernet Setup
DHCP= None
Client IP Pool:
DHCP Server Address= N/A
The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and
DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to
35.4 on page 576
Note: DMZ, WLAN and LAN IP addresses must be on separate subnets. You must
also configure NAT for the DMZ port (see
15.1 and 15.2.
586
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Menu 5.2 - TCP/IP and DHCP Ethernet Setup
Starting Address= N/A
Size of Client IP Pool= N/A
Press ENTER to Confirm or ESC to Cancel:
for information on how to configure these fields.
TCP/IP and DHCP Ethernet Setup,
TCP/IP Setup:
IP Address= 10.10.2.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= N/A
Multicast= IGMP-v2
Edit IP Alias= No
Chapter 42 on page
as shown next.
Section
611) in menus
Chapter 37 DMZ Setup