ZyXEL Communications ZyWall 5 Series User Manual page 177

Table 45 NETWORK > WAN > Dial Backup > Edit (continued)
LABEL
Dial Timeout (sec) Type a number of seconds for the ZyWALL to try to set up an outgoing call before
Retry Count
Retry Interval
(sec)
Drop Timeout
(sec)
Call Back Delay
(sec)
Apply
Cancel
Chapter 8 WAN Screens
DESCRIPTION
timing out (stopping).
Type a number of times for the ZyWALL to retry a busy or no-answer phone
number before blacklisting the number.
Type a number of seconds for the ZyWALL to wait before trying another call after a
call has failed. This applies before a phone number is blacklisted.
Type the number of seconds for the ZyWALL to wait before dropping the DTR
signal if it does not receive a positive disconnect confirmation.
Type a number of seconds for the ZyWALL to wait between dropping a callback
request call and dialing the corresponding callback call.
Click Apply to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
ZyWALL 5/35/70 Series User's Guide
177