Page 1
GENESIS COLORⅡ LED-CC 20Ⅱ User Guide Professional Entertainment Technology Innovation, Quality, Performance...
Page 2
EC Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC. EN55103-1:1996; EN55103-2:1996; EN61000-3-2:2006; EN:61000-3-3:1995+A1:2001+A2:2005. & Harmonized Standard EN60598-1:2004; EN60598-2-4:1997. Safety of household and similar electrical appliances Part 1: General requirements...
6. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in TABLE OF CONTENTS which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.
1. Safety Instruction 5. Troubleshooting Following are a few common problems that may occur during operation. Here are Please read carefully the instruction, which includes important information some suggestions for easy troubleshooting: about the installation, usage and maintenance. WARNING A. The unit does not work, no light and the fan does not work Please keep this User Guide for future consultation.
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged. Caution There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer.
3. How To Set The Unit 4.4 DMX 512 Configuration 3.1 Control Panel ○ 1 Display:To show the various menus and the selected functions ○ 2 DMX DMX input present ○ 3 MASTER Master Mode ○ Slave Mode 4 SLAVE ○...
Page 7
4.1 Master/Slave Built In Preprogrammed Function 3.2 Main Function By linking the units in master/slave connection, the first unit will control the other units to To select any of the given functions, press the MENU button up to when the required one is give an automatic, sound activated, synchronized light show.
to the main functions without any change after 8 seconds. To go back to the functions ENTER button and the display will To go back to the run self-test by built-in program. functions press the MENU button again. without any change press the MENU button again. Sound Mode Temperature Test Press the MENU button until the...