Accessing The Wireless Router - Pakedge WR-1 User Manual

Accessing the wireless router

To access the wireless router's GUI:
1. Plug an Ethernet cable from the wireless router to a computer.
2. Make sure your network card is set to obtain an IP address automatically. Then open any
Internet browser and go to the default IP address.
using Mozilla Firefox as your web browser. If you are using Internet Explorer, use version 9
or newer.
3. Enter the default username admin and the password admin, then click the arrow.
Note: The first time you log in, you will be directed to the Quick setup page and will be
required to update your password before proceeding to the dashboard.
WR-1 Wireless Router User Guide
Note: For best results, we recommend
9