Guest Network Settings - Pakedge WR-1 User Manual

• (
SSID WIRELESS NAME
cannot exceed 32 characters.
•
SECURITY PROFILE
to the SSID here.
•
ENCRYPTION
• : Prevents the SSID name from being broadcast. The SSID will still be available
HIDE SSID
for client access, provided the SSID is turned on. This is not a security feature.
• : This feature is also called "station separation," and it prevents clients on the
ISOLATE
same SSID from being able to access other clients on the network.

Guest network settings

The guest network acts as its own network and has access to only the Internet. Each access
point's guest network is independent from the guest networks of other access points.
To enable the guest network for each band, select
are PakedgeGuest2.4 and PakedgeGuest5, and the IP scheme is set to 192.168.200.X. You can
change the SSID, IP address, subnet, starting IP address, and ending IP address. After changes
are complete, click Apply to save them.
1. From the dashboard, click Network, then Wireless, then the Guest network tab. Click
Apply after making any changes.
• : Use this toggle to turn the guest network on or off.
ENABLE
•
WIRELESS NAME
•
SECURITY PROFILE
to the SSID here.
•
ENCRYPTION
WR-1 Wireless Router User Guide
): The SSID is the name associated with the WiFi network. An SSID
: The profiles created under the Security profiles tab may be applied
: Displays the encryption method that the selected security profile uses.
( ): Enter the guest network's SSID here.
SSID
: The profiles created under the Security profiles tab may be applied
: Displays the encryption method that the selected security profile uses.
. By default, the guest network names
ENABLE
30