Setting Up Remote File Sharing - Pakedge WR-1 User Manual

After you have enabled the file sharing and connected a USB drive into the wireless router, you
will see your drive listed in the Disk(s) available list.

Setting up remote file sharing

Remote File Sharing allows you to access the contents of your USB drive remotely.
To set up remote file sharing:
From the dashboard, click Services, then File sharing, then Remote file access. Click
1.
Apply after making any changes.
• Enable remote file access: Use this toggle to enable remote file access, then click
Apply.
•
Username: Enter a new username (default is fileshare).
•
Password: Enter a new password (default is pakedger).
2.
To remotely access the USB drive, use a web browser to go to
https://PublicIPaddress:8443/mydisk.html. Note: If you configured DDNS on the wireless
router, you can use that in place of the public IP address. You will see a login screen
similar to when you log into the wireless router.
3. Enter your credentials and click Log in. You will see the USB drive listed.
4. Click the USB drive to view the files and folders inside of it, then click a folder to view the
contents of it.
5. Select a file and click Download to retrieve the file from the USB drive. You can also click
Delete to remove it.
6. You can also upload a file onto the USB drive remotely. Click the file upload icon, navigate
to the file and select it, then click Upload.
7. You can also create folders. Enter the folder name in the Folder to create field, then click
Create Folder.
8. Finally, click Log out to log out of the file share.
WR-1 Wireless Router User Guide
37