File Sharing; Setting Up Local File Sharing - Pakedge WR-1 User Manual

• Zone field: Select WAN.
• Check for changed IP every: Set how often the wireless router will check to see if the
WAN IP address has changed. Unit types are specified in the Check-time unit.
• Check-time unit: Select the unit of time that is used for the Check for changed IP
every field.
• Force update every: Set how often the wireless router will force an update with the
DDNS provider.
• Force-time unit: Select the unit of time that is used for the Force update every field.

File Sharing

File sharing allows you to connect a USB drive onto the wireless router and share resources. The
wireless router offers both local and remote file sharing.

Setting up local file sharing

Local file sharing allows you to share the contents of a connected USB drive on the local network.
To configure local file sharing:
1. From the dashboard, click Services, then click File sharing. Click Apply after making any
changes.
• Enable local file shares: Use this toggle to enable local file shares, then click Apply.
You can now access the USB drive over the local network.
• Description: Enter how you want to see the local file share described.
• Workgroup: Enter the name of your network workgroup.
•
Username: Enter a new username (default is "pakedge").
• Password: Enter a new password (default is "pakedge").
• Read only: Select this so that computers on the network will be able to only read from
the drive and not write to it.
WR-1 Wireless Router User Guide
36