Page 2
Introduction The Pakedge WR-1 Wireless Router gives you the convenience of a high-throughput wired router integrated with an 802.11ac Wave 2 wireless access point. The router has advanced features like port forwarding and static routes, while also supporting UPnP for simple compatibility with common consumer devices. The WR-1 also integrates the BakPak Management sub-agent, which means that you can access the power of BakPak to monitor your WR-1 from anywhere in the world.
Page 3
• (1) Ethernet cable User guide • For more detailed instructions for this device and for the BakPak Management pkdge.co/wr1-ug Sub-agent, refer to the WR-1 User Guide ( Specifications • System requirements: Windows or Mac PC with an Ethernet interface. Access Point’s...
Page 4
Overview Front panel Back panel RESET 12V/1.5A F RESET button A Power G USB port B Internet H LAN ports C LAN port activity D 2.4 GHz active WAN (to modem/Internet) port J Power connector E 5 GHz active...
Page 5
3 Connect an Ethernet cable from your ISP modem to the WAN port on the WR-1. 4 Connect power to the WR-1. You are now ready to configure the unit to allow Internet access and register with...
Page 6
The Dashboard appears. The WR-1 Dashboard lets you navigate to all of the router’s configuration sections. 3 To configure your network’s basic settings, go to Quick Setup. 4 To register the WR-1 with BakPak, click the BakPak icon in the top menu bar.
Page 7
Registering your WR-1 with BakPak You can connect your WR-1 to your existing BakPak account or create a new account to manage all of your BakPak Management Agents. To register your WR-1 to your BakPak account: 1 In the Dashboard, click BakPak. The BakPak Registration page opens.
Need help?
Do you have a question about the WR-1 and is the answer not in the manual?
Questions and answers