Reset To Default; Reboot System; Firmware - Pakedge WR-1 User Manual

Reset to default

You can restore your router to its factory default settings.
To reset the wireless router to factory default settings:
1. Click System, then Maintenance.
2. Click Reset to default. The wireless router returns to factory default settings.
You can also return the router to factory defaults by pressing the pinhole reset button on
the back. Simply hold down this button for 10 seconds while the wireless router is
powered on, and then release it. The wireless router will then return to factory default
settings.

Reboot system

To reboot the router:
1. Click System, then Maintenance.
2. Click Reboot system located at the bottom of the Backup/Restore/Reboot tab
The wireless router reboots.

Firmware

The Firmware page will allow you to update the firmware on your wireless router.
To update the firmware:
1. The current firmware version of the wireless router is displayed near the top of the
dashboard.
WR-1 Wireless Router User Guide
66