Configuration - Pakedge WR-1 User Manual

2.
Profile Name: Create a name for the security profile.
3.
Encryption: Select an encryption type for your security profile:
• No encryption: This will leave your profile without security (not recommended).
• WPA PSK: Password must be at least eight characters long. This is a legacy
encryption protocol (not recommended).
• WPA2 PSK: Password must be at least eight characters long. AES-only encryption.
(Recommended)
• WPA/WPA2 PSK: Password must be at least eight characters long. This feature is
also known as Mixed Mode and uses TKIP encryption.
Note: Passwords may contain only numbers and letters. Special characters are not
allowed. Examples of special characters: (!@#$%:;^&*). Default password is
pakedgewireless .

Configuration

To configure SSIDs for both the 2.4 GHz and 5 GHz bands, go to the Configuration tab. The WR-
1 can set up one SSID per band.
1.
From the dashboard, click Network, Wireless, then the Configuration tab. Click Apply
after making any changes.
• Enable band steering: Band steering steers 5 GHz-capable clients to that frequency.
By enabling this, the 2.4 GHz SSID and settings will be copied to the 5 GHz band.
• : Use this toggle to turn the SSID on or off.
ENABLE
WR-1 Wireless Router User Guide
29