Winmate R15FA3S-PCC3-PoE User Manual
15 inch s-series hmi
android 6.0
freescale cortex a9 i.mx6 dual core 1 ghz
slim-line
Hide thumbs
Also See for R15FA3S-PCC3-PoE:
- Quick start manual (44 pages) ,
- User manual (48 pages) ,
- Quick start manual (40 pages)
Subscribe to Our Youtube Channel
Related Manuals for Winmate R15FA3S-PCC3-PoE
Summary of Contents for Winmate R15FA3S-PCC3-PoE
- Page 1 15"S-Series HMI Android 6.0 Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz R15FA3S-PCC3-PoE Slim-line User Manual Version 1.0 Document Part Number: 9152150I1004...
-
Page 2: Table Of Contents
USER MANUAL CONTENTS Contents PREFACE ........................ - 4 - ABOUT THIS USER MANUAL ................. - 11 - CHAPTER 1: INTRODUCTION ................- 13 - 1.1 Product Features ..................- 13 - 1.2 Package Content ..................- 14 - 1.3 Schematics and Dimensions ..............- 16 - Chapter 2: Getting Started ................... - Page 3 USER MANUAL CONTENTS 3.5 Reading RFID Tag ..................- 37 - 3.6 Winmate® Home Manager (WHM) ............- 39 - 3.6.1 How to Lock Applications ..............- 39 - 3.6.2 How to Unlock Applications ............- 42 - 3.7.3 How to Change Password ..............- 43 - 3.7 Using Front Camera ...................
-
Page 4: Preface
USER MANUAL PREFACE PREFACE Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. - Page 5 USER MANUAL PREFACE Customer Service We provide a service guide for any problem by the following steps: First, visit the website of our distributor to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance.
- Page 6 USER MANUAL PREFACE Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory.
-
Page 7: Safety Information
USER MANUAL PREFACE Safety Information WARNING! / AVERTISSEMENT! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. - Page 8 USER MANUAL PREFACE Safety Precautions For your safety carefully read all the safety instructions before using the device. Keep this user manual for future reference. Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. ...
- Page 9 USER MANUAL PREFACE CAUTION/ATTENTION Use the recommended mounting apparatus to avoid risk of injury. Utiliser l’appareil de fixation recommandé pour éliminer le risque de blessure. WARNING! / AVERTISSEMENT! Only use the connection cords that come with the product. When in doubt, please contact the manufacturer. Utiliser seulement les cordons d’alimentation fournis avec le produit.
-
Page 10: Important Information
USER MANUAL PREFACE Important Information Federal Communications Commission Radio Frequency Interface Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received ... -
Page 11: About This User Manual
ABOUT THIS USER MANUAL ABOUT THIS USER MANUAL This User Manual provides information about using the Winmate® 15” S-Series HMI with Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz (Optional Quad Core) processor. This User Manual applies to the 15” S-Series HMI – R15FA3S-PCC3-PoE. -
Page 12: Chapter 1: Introduction
USER MANUAL CHAPTER 1 INTRODUCTION INTRODUCTION This chapter gives you product overview, describes features and hardware specification. You will find all accessories that come with the HMI device in the packing list. Mechanical dimensions and drawings included in this chapter. - 12 -... -
Page 13: Product Features
CHAPTER 1: INTRODUCTION Interactive and smart automation systems of intelligent buildings are in a fast growing phase. Winmate® multi-touch S-Series HMI is suitable for home automation and room management systems. Flat surface is easy-to-clean and delivers aesthetically pleasing look for any interior. The device provides real time update for booking status and available schedule, or performs as a synchronous display in meetings. -
Page 14: Package Content
USER MANUAL CHAPTER 1 INTRODUCTION 1.2 Package Content Carefully remove the box and unpack your HMI device. Please check if all the items listed below are inside your package. If any of these items are missing or damaged contact us immediately. - Page 15 USER MANUAL CHAPTER 1 INTRODUCTION Package may include optional accessories based on your order: VESA Desk Stand VESA Wall Mount Bracket LA-100 LA-106 9B0000000128 9B0000000412 For installation instructions and dimensions of optional accessories refer to Ch.5, “Mounting Guide”. - 15 -...
-
Page 16: Schematics And Dimensions
USER MANUAL CHAPTER 1 INTRODUCTION 1.3 Schematics and Dimensions This section describes 15” S-Series HMI appearance. Unit: mm № Description № Description ① Console Port (for Linux) ⑤ RS-232/422/485 ② Micro SD Card Slot ⑥ USB 2.0 x 1 ③ LAN/ PoE ⑦... -
Page 17: Chapter 2: Getting Started
USER MANUAL CHAPTER 2 GETTINGS STARTED GETTING STARTED This chapter tells you important information on power supply, adapter and precautions tips. Pay attention to power considerations. - 17 -... -
Page 18: Powering On
USER MANUAL CHAPTER 2 GETTINGS STARTED Chapter 2: Getting Started This chapter provides information on how to connect the HMI device to the source of power, connector pinouts and the guideline to turn on/off the HMI device. 2.1 Powering On 2.1.1 AC Adapter Components 2 Pin Terminal Block to AC Adapter... -
Page 19: Power Considerations
USER MANUAL CHAPTER 2 GETTINGS STARTED ALTERNATING CURRENT / MISE À LE TERRE! This product must be grounded. Use only a grounded AC outlet. Install the additional PE ground wire if the local installation regulations require it. *If you do not use a grounded outlet while using the device, you may notice an electrical tingling sensation when the palms of your hands touch the device. -
Page 20: Connecting The Power
USER MANUAL CHAPTER 2 GETTINGS STARTED 2.1.3 Connecting the Power Wiring Instruction: Connect HMI device to a thermal block (2-pin). Connect the other side of the thermal block to the AC adapter. Connect the AC adapter to the power cord. Plug in the power cord to a working AC wall outlet. -
Page 21: Connector Pinouts
USER MANUAL CHAPTER 2 GETTINGS STARTED 2.2 Connector Pinouts This section contains I/O connector pinouts. 2.2.1 Power Input Connector DC power source input is a 2 pin terminal block connector. Power Input is 12V DC in. Minimum Voltage 11.4V Maximum Voltage 12.6V Maximum Current 4.2A Voltage 2.2.2 Ethernet Connector... -
Page 22: Usb Otg Connector
USER MANUAL CHAPTER 2 GETTINGS STARTED 2.2.4 USB OTG Connector Use USB OTG connector to connect the HMI device to other USB On-The-Go compliant devices such as flash drives, digital cameras, mice or keyboards. Use USB OTG cable to install software on the HMI device. Pin №... -
Page 23: Configuring Serial Com Port Settings
USER MANUAL CHAPTER 2 GETTINGS STARTED 2.3 Configuring Serial COM Port Settings Serial COM Port can be configured for RS-232, RS-422 or RS-485. Winmate provide COM port settings application for Android OS. To configure serial port settings: 1. Settings > Accessibility. - Page 24 USER MANUAL CHAPTER 2 GETTINGS STARTED 3. Comport-Setting > Comport 1/ Comport 2/ Comport 3 * Select Comport 1/ Comport 2/ Comport 3 that you want to configure. 4. Comport 1 > RS232/RS422/RS485 * Configure Comport 1 settings - 24 -...
-
Page 25: Turning On And Off
USER MANUAL CHAPTER 2 GETTINGS STARTED 2.4 Turning On and Off Turning ON: The unit is configured to Power ON when the HMI device is connected to the power source. Turning OFF: To turn off the device: 1. Swipe down from the top right of the screen. 2. -
Page 26: Chapter 3: Operating The Device
USER MANUAL CHAPTER 3 OPERATING THE DEVICE OPERATING THE DEVICE This chapter provides detailed information on how to operate the device. If you have been using touch-screen Panel PCs before, the interface may look familiar. Sections include system settings parameters. - 26 -... -
Page 27: Operating System
USER MANUAL CHAPTER 3 OPERATING THE DEVICE CHAPTER 3: OPERATING THE DEVICE In this chapter you will find an instruction on how to operate the HMI device. 3.1 Operating System S-series HMI supports: Android 6.0 (Default) Linux Kernel 4.1.5, QT 5.5 Browser (Optional) ... -
Page 28: Multi-Touch
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.2 Multi-Touch The touchpad supports the core gestures for Android. Gesture Action Description Touch To select or activate something Touch & Hold Touch and hold an item on the screen by touching it and not lifting your finger until it respond Touch, Hold &... -
Page 29: System Settings
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.2 System Settings 3.1.1 Set up the Device When you first turn on your HMI device, you’ll see a Welcome screen. Choose the language you want and touch Start or the Start icon. When prompted, you can sign in with your Google Account or create one at that time. - Page 30 USER MANUAL CHAPTER 3 OPERATING THE DEVICE Back Opens the previous screen you were working in, even if it was in a different app. Once you back up to the Home screen, you can’t go back any further. Home Returns to the Home screen. To get suggestions based on the screen you’re currently viewing, touch &...
-
Page 31: Quick Settings
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.1.3 Quick Settings You can open your device’s Settings app from the All Apps screen or from Quick Settings. For example, to change notification sounds, and volume go to Settings > Device > Sound to change the volume. - Page 32 USER MANUAL CHAPTER 3 OPERATING THE DEVICE Open the main Settings menu by touching Settings at the top right. - 32 -...
-
Page 33: Ethernet
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.3 Ethernet 1. Connect Ethernet Cable to the HMI. 2. Touch All APPS icon, and the open Ethernet application. 3. Ethernet APP main menu appears - 33 -... -
Page 34: Configure Ethernet
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.3.1 Configure Ethernet Go to All Apps > Ethernet > Configure Ethernet *Ethernet OFF is set by default. Swipe Ethernet ON to activate Ethernet connection. Connection Type Setting Description DHCP The device automatically capture IP-address from the router Static IP Allows to manually set up IP-address, DNS, Network and Gateway - 34 -... -
Page 35: Check Ethernet
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.3.2 Check Ethernet To check Ethernet settings: Go to All Apps > Ethernet > Check Ethernet Ethernet settings menu appears on the top right side of the desktop. - 35 -... -
Page 36: Testing Led Status Light Bar
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.4 Testing LED Status Light Bar Notice that LED Status Light Bar may not be present in your device. To test LED Light Bar go to APPS > Light BarDemo (This application is for demonstration purposes only). -
Page 37: Reading Rfid Tag
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.5 Reading RFID Tag Notice that RFID Reader is an optional feature for 15” S-Series HMI and may not be present in your device. Follow instructions below to test HF RFID Reader feature: 1. - Page 38 USER MANUAL CHAPTER 3 OPERATING THE DEVICE 4. It will turn off the module power and show “Disable module power” on the screen. - 38 -...
-
Page 39: Winmate® Home Manager (Whm)
3.6 Winmate® Home Manager (WHM) Winmate® S-Series HMI running on Android OS comes with preinstalled APP named Winmate Home Manager (WHM) which let the device manager to lock the launcher then the user can only use one application assigned by the device manager. - Page 40 USER MANUAL CHAPTER 3 OPERATING THE DEVICE Menu Description Home Manager Set which app you want to run up automatically after booting Password Manager Set the WHM password (Default password is “0000”). About Displays information about Home Manager 2. Go to “Application Selector”, and choose the app which you want to run up automatically after booting.
- Page 41 USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3. Go back to “Home Selector” and press “Clear and Reset Default Home”. 4. Select “Restrict Home” and “Always”, and then restart the computer to enable these settings. The system will automatically start the application which you selected and lock it. Any time user presses home key or back key;...
-
Page 42: How To Unlock Applications
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.6.2 How to Unlock Applications Follow the instruction below to reset Home Manager. 1. If you want to reset the home manager, pull down the left side to open the status bar and open HomeManager. 2. -
Page 43: How To Change Password
USER MANUAL CHAPTER 3 OPERATING THE DEVICE Default password is “0000”. Restart the system and you will go back to the normal Launcher. 3.7.3 How to Change Password To change the password: 1. Go to Password Manager and set your own password for this APP. 2. -
Page 44: Using Front Camera
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.7 Using Front Camera Notice that 2MP Front Camera is an optional feature for 15” S-Series HMI and may not be present in your device. 3.7.1 Taking Pictures To open Camera: 1. From the lock screen, touch Camera and swipe away from the camera icon in the bottom right corner. -
Page 45: Making Video
USER MANUAL CHAPTER 3 OPERATING THE DEVICE The Camera icon indicates Camera mode. To take a picture: 1. Frame your subject. If you want to make fine adjustments to focus, watch for the focus ring. To focus on a different part of the image, touch it. To zoom in, pinch two fingers outwards. -
Page 46: Camera Settings
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.7.3 Camera Settings You can change camera setting such as resolution & quality, save location, etc. in settings. To enter camera settings, touch in camera app. - 46 -... -
Page 47: Chapter 4: Software Installation
USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION SOFTWARE INSTALLATION This chapter describes how to install all necessary software. - 47 -... -
Page 48: Android Debug Bridge (Adb) Driver Installation
USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION Chapter 4: Software Installation This chapter contains software installation and updates guide. All the programming guides can be found in the driver CD included in the package. 4.1 Android Debug Bridge (ADB) Driver Installation IMPORTANT: ... -
Page 49: Disabling Driver Signature On Windows 8
USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION 4.1.1 Disabling Driver Signature on Windows 8 Step 1 Hold down the Windows key on your keyboard and press the letter C to open the Charm menu, and then click the gear icon (Settings). Step 2 Click Change PC Settings. - Page 50 USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION Step 3 Click General. Step 4 Under Advanced Startup, click Restart Now. NOTE: In Windows 8.1, the ‘Restart Now’ button has moved to ‘PC Setting -> Update & Recovery -> Recovery.’ Step 5 After restarting, click Troubleshoot. - 50 -...
- Page 51 USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION Step 6 Click Advanced Options. Step 7 Click Windows Startup Settings. - 51 -...
- Page 52 USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION Step 8 Click Restart. Step 9 After restarting your computer a second time, choose Disable driver signature enforcement from the list by typing the number 7 on your keyboard. Your computer will restart automatically. - 52 -...
- Page 53 USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION Step 10 After restarting, you will be able to install the ADB drivers normally; however, Windows will display a warning message. When the warning appears, click Install this driver software anyway. If you are unfamiliar with installing drivers, check out our Installing ADB driver tutorial for a step by step guide.
-
Page 54: Adb Driver Installation
USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION 4.1.2 ADB Driver Installation Step 1 Confirm whether the USB device was found by the system. Device Manager > 120A > Other devices > FA33_Taurus > Update Driver Software Step 2 In the Update Driver Software window choose Browse my computer for driver software. - Page 55 USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION Step 3 Select Let me pick from a list of device drivers on my computer. Click Next. Step 4 Select from your computer Step 5 In the Update driver software window, click show All Devices and then click Next. - 55 -...
- Page 56 USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION Step 6 The system is looking for the driver folder. Click Browse. Step 7 Select the driver for your OS system. Click Open. - 56 -...
- Page 57 USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION Step 8 Windows Security window will pop up. This message is used to confirm whether the user wants to install the driver. Select Install this driver software anyway to continue. Step 9 When the installation is successfully completed you will see Android ADB Interface driver in the Update Driver Software window.
-
Page 58: Installing Android Debug Bridge (Adb)
USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION 4.2 Installing Android Debug Bridge (ADB) For detailed Android Debug Bridge (ADB) information refer to Android Developers Platform: http://developer.android.com/tools/help/adb.html Step 1 Decompress adb.zip. Open ADB terminal and move into the adb archive. ADB Terminal window Step 2 Connect the HMI to the computer via USB. -
Page 59: Ota Update Guide
USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION 4.3 OTA Update Guide OTA is a tool which can help you to update OS image. To receive Android OS image file contact our sales representatives. Once you get the image file follow the guideline below. - Page 60 USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION System shows OTA firmware related information. 3. Click Auto-check Update. The system is checking OTA File. It may take some time. - 60 -...
- Page 61 USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION 4. Tap Update Image 5. Make sure the file founded by the system is image update file. Tap OK. - 61 -...
- Page 62 USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION 6. Make sure the battery level is at least 50%. Tap OK. 7. Tap OK. IMPORTANT: Do not disconnect the power source! Do not remove the battery! - 62 -...
-
Page 63: Os Image Update Guide
USER MANUAL CHAPTER 4 SOFTWARE INSTALLATION 8. After update the system will automatically restart. 4.4 OS Image Update Guide Download OS Image update guide from Winmate Download Center. Winmate Download Center: http://dc.winmate.com.tw/_downloadCenter/2016/Multitouch%20PPC/Download%20Image%20 Tool%20User%20Guide.pdf - 63 -... -
Page 64: Chapter 5: Mounting
USER MANUAL CHAPTER 5 MOUNTING MOUNTING This chapter provides step-by-step mounting guide for all available mounting options. - 64 -... -
Page 65: Cable Mounting Considerations
USER MANUAL CHAPTER 5 MOUNTING CHAPTER 5: MOUNTING This chapter provides mounting guide for all available mounting options. Pay attention to cautions and warning to avoid any damages. WARNING! / AVERTISSEMENT! Follow mounting instructions and use recommended mounting hardware to avoid the risk of injury. Suivez les instructions de montage et d'utilisation recommandé... -
Page 66: Safety Precautions
USER MANUAL CHAPTER 5 MOUNTING 5.2 Safety Precautions Observe the following common safety precautions before installing any electronic device: • Use separate, non-intersecting paths to route power and networking wires. If power wiring and device wiring paths must be crossed make sure the wires are perpendicular at the intersection point. -
Page 67: Panel Mounting
USER MANUAL CHAPTER 5 MOUNTING 5.3.1 Panel Mounting Panel Mount mounting solutions is suitable for many applications where HMI should be embedded in the machine. With this mounting solution flat surface leave no bezel in the front. Wall cutout Screw hole diameter Screws Quantity 360 x 292 mm M4 x5 mm... -
Page 68: Vesa Mounting
USER MANUAL CHAPTER 5 MOUNTING 5.3.3 VESA Mounting 5.3.3.1 VESA Desk Stand LA-100 The HMI device can be installed on a desk with the stand. You can purchase desk stand as an optional accessory. Mounting Instruction Use provided Philips M4x5 screws to fix the desk stand to VESA holes on the back cover of the device. - Page 69 USER MANUAL CHAPTER 5 MOUNTING 5.3.3.2 VESA Wall Mount Bracket LA-106 The HMI device can be installed on a desk with the stand. You can purchase desk stand as an optional accessory. Mounting Instruction - 69 -...
- Page 70 USER MANUAL CHAPTER 5 MOUNTING Accessories Dimensions - 70 -...
-
Page 71: Chapter 6: Technical Support
USER MANUAL CHAPTER 6 TECHNICAL SUPPORT TECHNICAL SUPPORT This chapter includes Technical Support and Software Development Kit (SDK). - 71 -... -
Page 72: Software Developer Support
This chapter includes technical support and Software Development Kit (SDK). If any problem occurs fill in problem report form enclosed and immediately contact us. 6.1 Software Developer Support Download software development documents from Winmate Download Center or Winmate File Portal. Item... -
Page 73: Problem Report Form
USER MANUAL CHAPTER 6 TECHNICAL SUPPORT 7.2 Problem Report Form 15" S-Series HMI (Slim-line) Customer name: Company: Tel.: Fax: E-mail: Date: Product Serial Number: _____________________________________________________ Problem Description: Please describe the problem as clearly as possible. Detailed description of the occurred problem will allow us to find the best solution to solve the problem as soon as possible. -
Page 74: Appendix A: Product Specifications
USER MANUAL APPENDIX A PRODUCT SPECIFICATIONS PRODUCT SPECIFICATIONS This section includes product specifications. Appendix - 74 -... - Page 75 User Manual Appendix A Product Specifications Appendix A: Product Specifications Hardware Specifications Model Name R15FA3S-PCC3-PoE Display 15'' TFT (LED Backlight) Size Resolution 1024 x 768 Brightness 250 nits Contrast Ratio 700:1(typ.) Viewing Angle -80~80(H);-70~70(V) Max Colors 16.2M colors (8bits) Touch...
- Page 76 User Manual Appendix A Product Specifications Cutout Dimensions 360 x 292 mm Cooling System Fanless Design Mounting VESA Mount (100 x 100 mm), Panel Mount Environmental Consideration Operating Temperature -20°C ~ +60°C Operating Humidity 10% ~ 90% (non-condensing, RH) IP Rating Front IP65 Power Specifications Power Input...
-
Page 77: Appendix B: Hf Rfid Reader Specifications
USER MANUAL APPENDIX B HF RFID READER SPECIFICATIONS HF RFID READER SPECIFICATIONS This section includes the list of supported RFID tags. Appendix - 77 -... - Page 78 USER MANUAL APPENDIX B HF RFID READER SPECIFICATIONS APPENDIX B: HF RFID READER SPECIFICATIONS The HF RFID Reader of this device supports the following card type. HF RFID Standard Purpose Standard for MIFARE technology, which used in smart ISO-14443 A cards and proximity cards ISO-15693 Standard for tracking items...
- Page 79 NOTES ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ _______________________________________________________________________...
- Page 80 Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, New Taipei City 24158, Taiwan, R.O.C Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Email: sales@winmate.com.tw Official website: http://www.winmate.com...
Need help?
Do you have a question about the R15FA3S-PCC3-PoE and is the answer not in the manual?
Questions and answers