Web Operation; Network Connection; Login And Main Interface - Dahua IPC-KW10 User Manual

5 5 5 5 Web Web Web

Web Operation

Operation Operation Operation
This series network camera products support the Web access and management via PC.
Web includes several modules: Monitor channel preview, system configuration, alarm and etc.

5.1 Network Connection

5.1 5.1 5.1 Network Connection Network Connection Network Connection
Please follow the steps listed below for network connection.
Make sure the network camera has connected to the network properly.
Please set the IP address, subnet mask and gateway of the PC and the network camera
respectively. Network camera default IP address is 192.168.1.108. Subnet mask is 255.255.255.0.
Gateway is 192.168.1.1
Use order ping ***.***.***.***(* network camera address) to check connection is OK or not.
5.2 Login and 5.2

Login and Main Interface

Main Interface
5.2 5.2 Login and Login and Main Interface Main Interface
Open IE and input network camera address in the address bar. See Figure 5- 1.
The login interface is shown as below. See Figure 5- 2.
Please input your user name and password.
Default factory name is admin and password is admin.
Note: For security reasons, please modify your password after you first login.
Figure 5- 1 IP address
Input your IP
address here
12