Dahua IPC-HFW5100C User Manual
  1. Manuals
  2. Brands
  3. Dahua Manuals
  4. IP Camera
  5. IPC-HFW5100C
  6. User manual

Dahua IPC-HFW5100C User Manual

Hd ir waterproof fixed network camera
Hide thumbs Also See for IPC-HFW5100C:
Table of Contents

Advertisement

Quick Links

HD IR Waterproof Fixed Network Camera User's Manual
Version 1.1.0

Advertisement

Table of Contents
loading

Related Manuals for Dahua IPC-HFW5100C

Summary of Contents for Dahua IPC-HFW5100C

  • Page 1 HD IR Waterproof Fixed Network Camera User’s Manual Version 1.1.0...
  • Page 2 Welcome Thank you for purchasing our network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
  • Page 3 Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please note: Do not connect two power supplying sources to the device at the same time;...
  • Page 4 Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.

  • Page 5: Table Of Contents

    Table of Contents General Introduction ...................... 1 Overview ......................1 Features ......................1 Specifications ....................2 1.3.1 Performance ....................2 Framework........................4 Multiple-function Combination Cable..............8 Framework and Dimension ................9 Bidirectional talk ....................10 2.3.1 Device-end to PC-end................10 2.3.2 PC-end to the device-end .................
  • Page 6 Operation ......................17 Web Operation ......................19 Network Connection ..................19 Login and Main Interface ................. 19 FAQ ..........................21 Appendix Toxic or Hazardous Materials or Elements ............22...

  • Page 7: General Introduction

    1 General Introduction 1.1 Overview This series network camera integrates the traditional camera and network video technology. It adopts audio and video data collection, transmission together. It can connect to the network directly without any auxiliary device. This series network camera uses standard H.264 video compression technology and G.711a audio compression technology, which maximally guarantee the audio and video quality.

  • Page 8: Specifications

     The enclosure conforms to the IP 66 protection. Has the waterproof function. 1.3 Specifications 1.3.1 Performance Please refer to the following sheet for network camera performance specification. Model IPC-HFW5100C(-H) IPC-HFW5200C(-H) IPC-HFW5202C(-H) Parameter Main Processor High performance DSP Embedded LINUX...
  • Page 9 Support customized setup. Video Flip Support mirror and flip function. Snapshot Max 1f/s snapshot. File extension name is JPEG. Privacy Mask Supports max 4 privacy mask zones Video Setup Support parameter setup such as bright, contrast. Video Channel title, time title, motion detect, camera masking. Information Manual 2.8~12mm Manual...

  • Page 10: Framework

    have. (Subject to actual product) Model IPC-HFW5302C(-H) IPC-HFW5300C（-H） Parameter Main Processor High performance DSP Embedded LINUX System Support real-time network, local record, and remote operation at the Resources same time. User Interface Remote operation interface such as WEB, DSS, PSS System Status Micro SD card status, bit stream statistics, log, and software version.
  • Page 11 Bidirectional Reuse the first audio input channel Talk Input Audio Bit Rate 16kbps 16BIT Audio Compression G.711A/G.711Mu/PCM Standard 396 (18*22) detection zones; sensitivity level ranges from 0 to 100; area threshold ranges from 0 to 100. Motion Detect Activation event: video storage, image snapshot, log, email function and etc.
  • Page 12 System Status Micro SD card status, bit stream statistics, log, and software version. Image Sensor 1/2.5-inch CMOS Pixel 2560(H)*1920(V) Support day/night mode switch and IR-CUT at the same time. Day/Night Mode (embedded IR-CUT) Auto Aperture Enable Gain Control Fixed/Auto White Balance Manual/Auto Off/BLC(default or custom)/WDR (0-100 adjustable)/HLC(0-100 adjustable)
  • Page 13 Record Priority Manual>External alarm >Video detect>Schedule Local Storage Support Micro SD card hot swap Storage Support display local storage status Management Wire Network 1-channel wire Ethernet port, 10/100 Base-T Ethernet Standard HTTP, TCP/IP, ARP, IGMP, ICMP, RTSP, RTP,UDP, RTCP, Network Protocol SMTP, FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, Bonjour, SNMP, QoS, IEEE802, Syslog Remote...

  • Page 14: Multiple-Function Combination Cable

    2 Framework 2.1 Multiple-function Combination Cable You can refer to the following figure for multiple-function combination cable information. See Figure Figure 2-1 Multiple-function combination cable Please refer to the following sheet for detailed information. Port Name Function Connection Note Power port. Input DC 12V or AC 24V. (convertor is required) Power input DC12V/AC24V...

  • Page 15: Framework And Dimension

    Port Name Name Note ALARM_COM Alarm output public port. Alarm output port. It is to output the alarm signal to the alarm device. ALARM_NO NO: normal open alarm output port. It shall work with ALARM_COM port. I/O Port Alarm input port 1. It is to receive the on-off signal ALARM_IN1 from the external alarm source.

  • Page 16: Bidirectional Talk

    2.3 Bidirectional talk 2.3.1 Device-end to PC-end Device Connection Please connect the speaker or the MIC to the audio input port of the device. Then connect the earphone to the audio output port of the PC. Login the Web and then click the Talk button to enable the bidirectional talk function. You can see the button becomes orange after you enabled the bidirectional talk function.
  • Page 17 Figure 2-4 Alarm Please refer to the following figure for alarm input information. See Figure 2-5. Alarm input: When the input signal is idle or grounded, the device can collect the different statuses of the alarm input port. When the input signal is connected to the 5V or is idle, the device collects the logic “1”.

  • Page 18: Device Installation

    3 Device Installation 3.1 Device Installation Please follow the steps listed below to install the device. Please refer to Figure 3-1 for reference.  Dig three holes in the wall or the surface, and then input the three expansion bolts to the holes and secure.

  • Page 19: Adjust Lens

    Figure 3-2 Micro-SD card 3.3 Adjust Lens Rotate lens counterclockwise, and take it down. You can see its front and rear adjusting rod. Front rod adjusts focus while rear rod adjusts zoom. After adjusting rod, rotate lens cover clockwise to fasten it. See Figure 2-3.

  • Page 20: Adjust Bracket

    Figure 3-3 Adjusting lens 3.4 Adjust Bracket You adjust bracket with a M4 inner hex screw. Before adjustment, you loosen the screw with inner hex wrench in accessories bag. Rotate rear cover 360°horizontally, and 90°vertically. Rotate pedestal 360°. Secure the screw with inner hex wrench after adjustment. See Figure 2-4. Note: M4 inner hex wrench must be secured, otherwise the pedestal will be unstable and device cannot be fixed to specific angle.

  • Page 21: Button

    Figure 3-4 Adjusting bracket 3.5 Button You can switch button to up/down to zoom in/out. You also can switch button to left/right to focus. Long press button for 2s for auto focus which makes video clear. See Figure 2-5 and 2-6. Note: The button is for motorized series only.
  • Page 22 Figure 3-5 Button Position Figure 3-6 Button...

  • Page 23: Quick Configuration Tool

    4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”...
  • Page 24 In the configuration tool search interface (Figure 4-1), please select a device IP address and then double click it to open the login interface. Or you can select an IP address and then click the Login button to go to the login interface. See Figure 4-3. In Figure 4-3, you can view device IP address, user name, password and port.

  • Page 25: Web Operation

    5 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Please follow the steps listed below for network connection. ...
  • Page 26 Figure 5- 2 Web login After you successfully logged in, please install WEB plug-in unit. Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction. See Figure 5- 3. Figure 5- 3 Web monitoring window...

  • Page 27: Faq

    6 FAQ I can not boot up Please click RESET button for at least five seconds to restore the device. factory default setup. Micro card Do not set the Micro SD card as the storage media to storage the write times schedule record file.

  • Page 28: Appendix Toxic Or Hazardous Materials Or Elements

    Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Circuit Board ○ ○ ○ ○ ○ ○ Component Device ○ ○ ○ ○ ○ ○ Construction Material ○ ○ ○ ○ ○...

This manual is also suitable for:

Ipc-hfw5100hIpc-hfw5200cIpc-hfw5200hIpc-hfw5202cIpc-hfw5202hIpc-hfw5300c ... Show all

Table of Contents