Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Dahua IPC-KW10
Summary of Contents for Dahua IPC-KW10
- Page 1 IP Camera User’s Manual Version 1.0.0 Zhejiang Dahua Technology CO.,LTD...
- Page 2 Welcome Thank you for purchasing our network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
- Page 3 Important Safeguards and Warnings 1． ． ． ． Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1.
- Page 4 Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.
-
Page 5: Table Of Contents
Table of Contents General Introduction ........................1 Overview ........................1 Features.........................1 Specifications ........................2 1.3.1 Performance......................2 Framework...........................5 Device Components.....................5 Dimensions........................6 Bidirectional talk......................7 2.3.1 Device-end to PC-end ..................7 2.3.2 PC-end to the Device-end..................7 Device Installation ........................8 Quick Configuration Tool......................10 Overview ........................10 Operation ........................10 Web Operation..........................12 Network Connection....................12 Login and Main Interface...................12 FAQ ............................14... -
Page 6: General Introduction
1 1 1 1 General Introducti General Introduction General Introducti General Introducti 1.1 Overview Overview Overview Overview This series network camera integrates the traditional camera and network video technology. It adopts video data collection, transmission together. It can connect to the network directly without any auxiliary device. -
Page 7: Specifications
Support PIR human body movement detect. Support white light alarm function. 1.3 Specification Specification Specifications s s s Specification 1.3.1 Performance Please refer to the following sheet for product performance specification. Model IPC-KW10 IPC-KW10W IPC-KW12 IPC-KW12W Parameter Main Processor High performance DSP Embedded LINUX System... - Page 8 Support mirror. Video Flip Support flip function. Snapshot Max 1f/s snapshot. File extension name is JPEG. Privacy Mask Supports max 4 privacy mask zones Video Setup Support parameter setup such as bright, contrast. Video Channel title, time title, motion detect, camera masking. Information 3.6mm.
- Page 9 Power DC 12V Power 3.4W MAX 5.4W MAX 3.4W MAX 5.4W MAX Consumption Working ℃ ~ +60 ℃ ℃ ~ +55 ℃ ℃ ~ +60 ℃ ℃ ~ +55 ℃ Temperature Working 9 5% ≤ Humidify Dimensions(mm) 66.6*99.5*131.2 Weight 200g E xcluding box （...
-
Page 10: Framework
2 2 2 2 Framework Framework Framework Framework 2.1 Device Components Device Components Device Components Device Components You can refer to the following figure for component information. See Figure 2-1 Figure 2-1 Component Please refer to the following sheet for detailed information. Port Name Indicator Connector... -
Page 11: Dimensions
Port Name Indicator Connector Note IR light For lighting at night Output audio signal. Speaker (This function is optional. For some series product only.) Microphone Directly receive audio signal. SD card storage. Micro Micro SD card Micro SD (This function is optional. For some card slot series product only.). -
Page 12: Bidirectional Talk
2.3 Bidirectional Bidirectional talk talk Bidirectional Bidirectional talk talk 2.3.1 Device-end to PC-end Device Connection Please connect the earphone to the audio output port in the PC. Login the Web and then click the Audio button to enable the bidirectional talk function. You can see the button becomes yellow after you enabled the audio talk function. -
Page 13: Device Installation
3 3 3 3 Device Installation Device Installation Device Installation Device Installation This series camera support two installation modes: wall mount and pendant mount. See Figure 3-1 and Figure 3-2. Important Please make sure the installation surface can min support the 3X weight of the camera and the bracket. - Page 14 Fix the device with screw in the accessories bag. Step 5 Connect the cable and then boot up the device. Step 6 Loosen the adjust knob for a little bit, adjust the camera to proper surveillance position according to your actual requirements. Step 7 Secure the knob of the bracket to fix the camera.
-
Page 15: Quick Configuration Tool
4 4 4 4 Quick Configuration Tool Quick Configuration Tool Quick Configuration Tool Quick Configuration Tool 4.1 Overview Overview Overview Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. - Page 16 If you want to modify the device IP address without logging in the device web interface, you can go to the configuration tool main interface to set. In the configuration tool search interface (Figure 4-1), please select a device IP address and then double click it to open the login interface.
-
Page 17: Web Operation
5 5 5 5 Web Web Operation Operation Operation Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Network Connection Network Connection Network Connection Please follow the steps listed below for network connection. - Page 18 Figure 5- 2 Web login After you successfully logged in, please install WEB plug-in unit. Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction. See Figure 5- 3. Figure 5- 3 Web monitoring window...
-
Page 19: Faq
6 6 6 6 FAQ I can not boot up Please click RESET button for at least five seconds to restore the device. factory default setup. SD card hot swap Before draw out SD card, please stop record or snapshot first and then wait for at least 15 seconds to remove the SD card. - Page 20 Power adapter The general power adapter can work ranging from 0 ℃ to 40 ℃ The device may result in unstable power supply when the temperature exceeds the working temperature. Please replace an industry-level power adapter if you are using in the harsh environments.
-
Page 21: Appendix Toxic Or Hazardous Materials Or Elements
All trademarks and registered trademarks mentioned are the properties of their respective owners. If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website for more information. Dahua Technology Co.,Ltd Address ： N o.1187 Bin’an Road, Binjiang District, Hangzhou, PRC. - Page 22 European notice Products with the CE marking comply with Radio & Telecommunication Terminal Equipment Directive (R&TTE) (1999/5/EC), the Electromagnetic Compatibility Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) - issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Standards: EN 301 489-1: Electronic compatibility and Radio spectrum Matters (ERM), Electromagnetic...
- Page 23 FCC Compliance Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.