Page 1
Quick Installation Guide Attention: Please make sure the installation surface is thick enough to sustain at least 3X weight of the camera. Note: If you want to install in the wood surface, expansion bolts are not necessary. The screw depth shall reserve 8mm-10mm to secure the bracket. Please refer to Figure 1-1 for installation of Model A.
Page 2
Please refer to Figure 1-3 for the installation of Model C. Figure 1-3 Please refer to Figure 1-4 for the installation of Model D. Figure 1-4 Please refer to Figure 1-5 and 1-6 for the installation of Model E.
Page 3
Figure 1-5 Figure 1-6 Please refer to Figure 1-7 for the installation of Model F.
Page 4
Figure 1-7 Note This manual is for reference only. Please visit our website or contact your local service engineer for more information.