Figure 30. GPS Arrestor GPS Antenna Cable Connection Detail
1 Install the GPS cable from the GPS ANT. port of the GPS arrestor to the GPS antenna.
2 Connect the assembled connectors of the GPS cable (LMR-400) to the GPS arrestor and
antenna port.
LMR-400 Cable: N Type-Male (GPS Arrestor EQP)
TNC Type-Male (GPS Antenna)
GPS Antenna
Detail 'C-2'
Straight Adaptor
Verizon 4G LTE Network Extender 2 User Guide v1.1
Copyright © 2017, All Rights Reserved.
GPS Cable (LMR-400)
Heat Shrink Tube
N Type-Male Connector
GPS Arrestor
GPS Antenna
TNC Male Connector
Heat Shrink Tube (Jelly Type)
GPS Cable (LMR-400)
Clamp Fixing Screw
Clamp
Bakelite
GPS Antenna Fixing Pipe
Appendix A Outdoor GPS Antenna Installation
Detail 'D'
58