Samsung 4G LTE Network Extender 2 User Manual page 58

Network systems
Table of Contents

Advertisement

Installing the Antenna
When you install the antenna, the antenna must be within the protective angle
(left/right side 45° each from the central axis) to prevent the antenna from
lightning damage.
Installing GPS Antenna
When installing the GPS antenna, you must check the antenna installation location,
restriction and installing method.
Checking the Specifications of Antenna/Arrestor/Line Amplifier Connector
Depending on the supplier or manufacturer of the antenna/arrestor/line amplifier,
the connector type may be different. Also, the detail specifications of a connector
may be different depending on the cable type even for the same connector type.
Therefore, check the detail specifications of a connector before preparing parts (for
example, N Type-Male: N Type-Male connector for CNT-400, N Type-Male
connector for RG-316D).
Specification of GPS Line Amplifier
The GPS line amplifier specification is 'Symmetricom-58529A' or equivalent.
(http://www.symmetricom.com/products/gps-solutions/accessories/58529A-GPS-
Line-Amplifier-with-L1-Bandpass-Filter/)
Verizon 4G LTE Network Extender 2 User Guide v1.1
Copyright © 2017, All Rights Reserved.
Appendix A Outdoor GPS Antenna Installation
50

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sls-bu10b

Table of Contents