Network Extender Basics; Figure 4. Components - Front And Rear View - Samsung 4G LTE Network Extender 2 User Manual

•
•

Network Extender Basics

This section will guide you through the basic features and functions of your
Network Extender.
The included GPS antenna is required for the automated setup process and is
necessary in the event the mobile phone is used to call for emergency services
while in the coverage area of the Network Extender.

Figure 4. Components - Front and Rear View

The Network Extender includes the following key features and connections:
•
•
•
•
•
Verizon 4G LTE Network Extender 2 User Guide v1.1
Copyright © 2017, All Rights Reserved.
Power: 120 VAC outlet
Home satellite broadband access is not supported.
The Power/Status Indicator shows the unit is on and in service.
The LCD Display shows status messages and device icons indicating the
number of LTE devices connected to the Network Extender and the number of
GPS satellites tracked.
The Display Button scrolls the LCD display to provide additional information
about the device when in operation.
The GPS Antenna is located under the GPS antenna cover on the top middle
of the Network Extender. Slide the cover open to access to the GPS antenna to
install the extension cable, if needed. See the Configuring Your Device
chapter.
The LAN Port allows you to connect an Ethernet cable to establish
communication between the Network Extender and your broadband router.
This connection port is then used to transmit voice and data through the
Internet to the Verizon wireless network.
Chapter 1 Getting Started
3