Matrix Fitness Johnny G KRANKcycle Service Manual page 44

CHAPTER 7: CyClE SPECIfICATIoNS AND ASSEMbly gUIDE
7.4 lEVElINg THE KRANKcycle™
STABILIZING THE KRANKcycle™
After positioning the KRANKcycle™ in its intended location, check its stability by attempting to shake it side to side. Shaking or rocking
indicates that your cycle needs to be leveled. Determine which leveler is not resting completely on the floor. Turn the leveler until the rocking
motion is eliminated.
!IMPoRTANT!: Do not screw the leveling feet out more than 1/2 inch.
!WARNINg!: The KRANKcycle™ should be installed on a stable base and properly leveled before use.
41