CHAPTER 5: TRoUblESHooTINg
5.6 TRoUblESHooTINg - loWER CHAIN DRIVE MAKES ClICKINg NoISE
loWER DRIVE CHAIN MAKINg A PRoNoUNCED ClICKINg NoISE
1) Over time, it is normal for the drive chains to stretch. The KRANKcycle™ is equipped with automatic chain tensioning devices, but the chain
may need to be replaced if it has stretched too far. Follow the next steps to check for excessive chain wear or stretch.
2) Remove both of the lower plastic covers by removing 9 socket head cap screws with a 3mm Allen wrench and a 5mm Allen wrench.
3) If the chin is rubbing on the inside covers or exhibits too much play around the sprockets, the chain should be replaced.
4) Replace both lower plastic covers.
16