CHAPTER 6: PART REPlACEMENT gUIDE
6.3 loWER PlASTIC SHRoUDS REPlACEMENT
1) Remove the right side crank as outlined in Section 6.1.
2) Remove the upper plastic shroud as outlined in Section 6.2.
3) Use a 3mm Allen wrench to remove the 6 screws holding the shrouds together (Figure A).
4) Use a 5 mm Allen wrench to remove the 3 screws holding the shrouds to the frame (Figure B).
5) Remove both lower plastic shrouds (Figure C).
6) Reverse Steps 1-5 to install new lower plastic shrouds.
fIgURE A
fIgURE b
fIgURE C
21