Table of Contents
Advertisement
CHAPTER 6: PART REPlACEMENT gUIDE
6.4 lEfT SIDE CHAIN / PUllEy REPlACEMENT
1) Remove the right side crank as outlined in Section 6.1.
2) Remove the upper plastic shroud as outlined in Section 6.2.
3) Remove the lower plastic shrouds as outlined in Section 6.3.
4) Press the height adjustment lever and rotate the drive assembly towards the seat until the hole in the drive shaft aligns with the hole in the
front of the frame (Figure A).
5) Insert a piece of hardened metal into the hole in the frame / drive shaft to prevent the drive shaft from turning (Figure B).
6) Rotate the fly wheel forward and the left side pulley / chain will come off of the drive assembly (Figure C & D).
7) Reverse Steps 1-6 to install a new left side chain / pulley. NOTE: Be sure to reroute the chain around the idler.
fIgURE A
fIgURE b
fIgURE C
fIgURE D
22
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
