Arming Mode Settings - Vezco VZ-IP-BUTIDS-WI User Manual

3. Set the zone type, alarm type, status of arming status, entering delay, and exiting
delay.
4. Press the

6 zone types are selectable: Panic Button, Door Magnetic, Smoke Detector, Active
Infrared, Passive Infrared, and Gas Detector.

3 alarm types are selectable: 24h Alarm, Instant Alarm, and Delay Alarm.
Set the alarm type as 24h alarm, and the zone will be armed for 24h.
o
Set the alarm type as instant alarm, and the zone will alarm once it's triggered.
o
Set the alarm type as delay alarm, and you should set the entering delay duration
and exiting delay duration.

Both the entering delay duration and the exiting delay duration are from 30s to 60s.

For Gas Detector and Smoke Detector, the alarm type is set as default 24h alarm.


7.3.5 Arming Mode Settings

Purpose:
4 arming modes can be configured: outdoor mode, indoor mode, sleeping mode and
custom mode.
Steps:
1. Get to the arming mode settings interface: Settings -> Arming Mode
Video Intercom Indoor Station·User Manual
Figure 9-11 Zone Editing Interface
tab to save the settings.
24