5. Press the
tab to save the settings.
Enable DHCP function to obtain an IP address automatically.
Enable Same LAN function if indoor stations and indoor extensions are in the same
local area network with other video intercom devices in a community, or the indoor
extensions will not work normally.
Setting the SIP Server
Purpose:
To realize the connection between the indoor station and the management center
(master station), the indoor station should connect to a SIP server in advance.
Steps:
1. Get to the device management interface: Settings -> Configuration -> Device.
2. Press the SIP Sever tab, and enter the IP address of the SIP server.
3. Press the
tab to save the SIP server added.
The master station can work as a SIP server.
Indoor extension cannot connect to the SIP server.
Adding Devices
Purpose:
The indoor station never works alone. You can connect the main door station, IP camera,
SIP server, management center, master station, DVR/DVS/NVR, and so on. Once
connected, those devices can work together as a whole video intercom system.
Indoor station does not support adding IP camera, DVR/DVS/NVR, or doorphone.
Indoor Extension only supports adding indoor station.
Setting Center/Master Station (Optional)
Steps:
1. Get to the device interface: Settings -> Configuration -> Device.
2. Press the Center or Master Station tab to pop up the device information dialogue
box.
Video Intercom Indoor Station·User Manual
29