Table of Contents
Advertisement
Time
Steps:
1. Click the Time button to enter the device time settings interface.
2. Select Time Zone or Enable NTP.
Time Zone
1)
Select a time zone from the drop-down list menu.
2)
Click the Synchronization button.
NTP
1)
Check the checkbox of Enable NTP to enable NTP.
2)
Enter the server address, NTP port, and synchronization interval.
DST
1)
Check the checkbox of Enable DST to enable DST.
2)
Enter the start time and end time of DST, and set the DST bias.
3. Click the Save button to save and realize the time settings.
The default port No. is 123.
System Maintenance
Purpose:
You can operate the system management and remote upgrading on the system
maintenance interface.
Steps:
Video Intercom Indoor Station·User Manual
Figure 8-14 Time Settings
51
Advertisement
Table of Contents
