Sound Settings - Vezco VZ-IP-BUTIDS-WI User Manual

2. Press the Admin Password tab, Duress Code tab, Unlock Password tab, or
Arm/Disarm Password tab to enter corresponding interfaces.
3. Press the Edit tab to pop up the password changing dialogue box.
4. Enter the old password to change it
5. Enter the new password and confirm it.
6. Press the tab to save the settings.
STRONG PASSWORD RECOMMENDED– We highly recommend you to create a
strong password of your own choosing (using a minimum of 8
characters, including at least three kinds of following categories: upper
case letters, lower case letters, numbers, and special characters) in
order to increase the security of your product. And we recommend
you reset your password regularly, especially in the high security system, resetting
the password monthly or weekly can better protect your product.
 The default admin password (configuration password) is 888999.
 The default unlock password, arm/disarm password, and scene password are 123456.
 The default duress code is 654321.
 For Indoor Extension, only admin password and arm/disarm password are supported.

7.3.2 Sound Settings

Purpose:
You can set the ringtone, ring duration, call forwarding time, volume of microphone and
loudspeaker, enable/disable touch sound and auto-answer function on sound settings
interface.
Steps:
1. Get to the sound settings interface: Settings -> Sound Settings.
Video Intercom Indoor Station·User Manual
Figure 9-6 Password Changing Interface
20