Table of Contents
Advertisement
For indoor station and master station, there are 3 choices for the working mode:
transparent channel, disable, and custom.
Video Intercom
8.4.2
Click the Video Intercom button on the remote configuration interface to enter the
video intercom parameters settings: Device Number Configuration, Time Parameters,
Password, Zone Configuration, IP Camera Information, and Volume Input and Output
Configuration, and so on.
Device ID Configuration
Steps:
1. Click the ID Configuration button to enter device ID configuration interface.
Figure 8-22 Indoor Station
2. Select the device type from the drop-down list, and set the corresponding
information.
3. Click the Save button to enable the device number configuration.
Time Parameters
1. Click the Time Parameters button to enter time parameters settings interface.
2. Configure the maximum ring duration, maximum live view time, and call forwarding
time.
3. Click the Save button.
Maximum ring duration is the maximum duration of indoor station when it is called
without being received. The range of maximum ring duration varies from 30s to 60s.
Video Intercom Indoor Station·User Manual
Figure 8-24 Time Parameters
Figure 8-23 Indoor Extension
56
Advertisement
Table of Contents
