System Maintenance - Vezco VZ-IP-BUTIDS-WI User Manual

2. Press Outdoor Mode tab, Indoor Mode tab, Sleeping Mode tab, and Custom Mode
tab to enter corresponding arming mode settings interface.
3. Switch to

Zones in each arming mode can be configured manually. See detailed information
in

7.3.4 Zone Settings.

For 24H alarm zone and smoke detector zone, even if it is disabled under
current arming mode, the indoor station will still alarm when it is triggered.

Arming mode settings should be configured with the settings of arming status
on the the user interface of the device.


7.3.6 System Maintenance

Purpose:
You can format TF card, clear the screen, view the version information of the indoor
station and reboot the system on the system maintenance interface.
Steps:
1. Get to the system maintenance interface: Settings -> Maintenance.
2. Press the Format tab to format the TF card.
Video Intercom Indoor Station·User Manual
Figure 9-12 Arming Mode Settings Interface
to enable the arming in the selected zoon.
25