Arming Status - Vezco VZ-IP-BUTIDS-WI User Manual

7.2.5 Arming Status

Purpose:
4 kinds of scene modes are supported by the indoor station: Sleeping Mode, Indoor
Mode, Outdoor Mode, and Custom Mode.
You can arm or disarm your room in each scene mode manually. When your room is in
the arming status, the arming status will display on the main interface of the indoor
station.
Arming Your Room
Steps:
1. Press the Arming Status tab to display the arming status interface.
2. Press the Arm tab.
3. Enter the arm password to enable the arming status.
4. (Optional) Press a scene mode icon, and enter the arm password to change the scene
mode of the indoor station.
Example: After setting the arming status, press the Sleeping tab, and enter the arm
password. The indoor station changes to the arming status of the sleeping mode and
the interface will display as follow:
Video Intercom Indoor Station·User Manual
Figure 9-1 Pressing Arm Tab
Figure 9-2 Sleeping Mode
17